The Snappi® Diaper Fastener is a pinless diaper fastener. It is easy to use and also is practical and reliable. The stretchable,
non-toxic material is T-shaped with teeth on each end. Those teeth hook into the fabric of the diaper so the diaper gets pulled together. As an extra safety feature, Snappies® have a
crescent-shaped loop at the end of each leg. When not in use, fold the loop over the back of the Snappi® end to fit over the teeth. Please see the photo above. When using this loop, there is a
barrier so the sharp teeth are not exposed. Do not pull on these loops when fastening the Snappi® Diaper Fastener. Hold the solid part of the tab when attaching it to a diaper.
Snappi® Diaper Fasteners come in 2 sizes. Size 1 is the Baby size and Size 2 is the Toddler size. Size 2 fits larger babies better because it is longer across the top T. When stretching
it out, the Size 2 Snappi® Diaper Fastener has an extra 4" across the width as compared to Size 1. That means Size 2 fits a waist up to 30".
Approximate Age Recommendations: Size 1 - birth through 18 months; Size 2 - 16 months+
Using Snappi® Diaper Fasteners means no more pinpricks from diaper pins, a snug fitting diaper, no snaps or Velcro and they are easy to use for first time parents and grandparents. Plus
Snappi® Diaper Fasteners and the diapers you use with them are very affordable - flat, prefold and contour diapers!
Directions for Use:
Before using, stretch the Snappi® Diaper Fastener to trigger the memory of the Snappi® to return it to its original size, thus giving the diaper a
snug fit. To stretch the Snappi® Diaper Fastener, hold it in the center with one hand and with the other hand grab one end close to the tab and stretch about 10 times. Repeat for each leg.
To attach, make sure that the Snappi® Diaper Fastener is attached securely. Hold onto the solid part of the tab and follow the diagram.
You can see that the T shape of the Snappi® has changed to a Y shape.
Always place a diaper cover over the diaper and Snappi® Diaper Fastener. These cloth diaper fasteners work
best with terry cloth diapers, cotton prefolds and other cloth diapers with a loose enough weave for the Snappi® to grab onto.
Care Instructions: Clean with hot soapy water. Do not put them in the washing machine.
Do not use on toddlers with the ability to undo their cover and take off their diaper.
Keep Snappi® Diaper Fasteners out of the reach of children when not in use.
your Snappi® before each use and don't use if there is any sign of cracking, tearing, breakage or wear of the teeth or any other parts.
- Do not leave lying in the sun and do not use longer than 6 months.
WARRANTY: Snappi® Baby warrants Snappi® products against manufacturer's defect for one month after date of purchase. This warranty includes replacement of the product,
if the broken product is returned to Snappi® Baby with proof of purchase, and it is determined to Snappi® Baby's satisfaction, that the breakage or defect was not caused by
improper use of the product. This warranty does NOT cover the breakage of the loops on the Snappi® fasteners. These loops are NOT to be pulled on when attaching the Snappi®
fastener to the diapers. When attaching the Snappi®, hold onto the solid part of the tab. The loops are designed for the safety feature of the Snappi®, as described above,
when it is not in use. The thin loop acts as a barrier preventing the sharp teeth from being exposed.